澳洲5开奖结果Comments Off on What You Need to Know About Industrial Piping
Food processing plants, chemical plants, and other industrial facilities require industrial piping, and specifically, process piping. Many systems use this piping to transport materials such as gas and liquid. Other systems are designed to convey powders and slurry. These materials are transported safely through the means of industrial piping. New Jersey manufacturing facilities rely on this piping for some of their key processes. At Rapid Pump & Meter Service Co., Inc. and Machinery Services Corp., we provide turnkey construction services for various industries, including transportation, municipal, commercial, and sectors that have a large selection of pumps and other equipment made by leading domestic manufacturers.
Process Piping vs. Pipelines
There is a difference between process piping and pipelines that are designed to move fluids and gases over long distances between facilities. Process piping conveys these substances within the same facility.
Process Piping Systems and Safety
Industrial piping in the category of process piping can transport toxic and non-toxic materials. Based on the type of gas or fluid your piping system must handle, professional engineers design systems to conform to the regulations and codes established by the American Society of Mechanical Engineers (ASME).
With the installation of pressure relief devices, process piping systems have the ability to operate efficiently and safely under interior impact events such as pressure surges and water hammers.
Fire is a danger in many piping systems that convey combustible gases and liquids. Process piping systems are designed to contain or relieve the maximum pressure imposed by heat from fires. They are designed to endure extreme temperatures.
Industrial piping should be designed in coordination with geotechnical engineers to ensure any settling of the soil and/or rock under a facility over time does not affect the integrity and operation of the piping, both below and above ground.
The testing of process piping systems after installation is necessary to ensure they operate optimally and that no excessive vibration causes issues. If modifications, repairs, or replacements to the piping are made, further testing is needed.
For information about the array of control and instrumentation, pump, and other plant and machinery services we offer in Northern New Jersey and beyond, call us today at 973.345.5600 or use our contact form to drop us a message.
Stay Compliant with Generator MonitoringComments Off on Stay Compliant with Generator Monitoring
Rapid Pump and Meter Service Co., Inc. Offers the #1 Selling Cellular based generator monitoring system in the country
Gen-tracker generator monitoring prevents you from incurring fines for running the generator on bad air quality days issued by the STATE. One of the services we provide is to check the air quality according to EPA guidelines prior to exercising the unit.
Most people do not realize that although air quality can be good the day of the exercise, if the forecast is bad at 4pm on the day PRIOR to exercise you cannot run the machine. This is why we monitor generators.
Did you know that over 90% of generator failures occur during the regular exercise. That’s information you need long before an emergency or outage. Working together with Rapid Pump and Meter Service Co., Inc. and their skilled Service team we will get instant notification when a problem arises. Whether you have one generator or a dozen. Generator monitoring helps prevent these unexpected failures.
Gen-Tracker generator monitoring system is designed to provide the necessary information that your generator is working when it should, as it should and performing how it should.
What does Gen-Tracker generator monitoring provide?
- Peace of mind. You’ll know your generator is being monitored by Rapid Pump and Meter Service Co., Inc. every minute of every day.
- It’s Universal. Any generator can be tracked and monitored with Gen-Tracker.
- The system is cellular based, so IT involvement is not required
- Reports. Receive e-mail or text documentation of all generator activity including:
- Run Time
- Transfer Switch Position
- Loss of Building Power
- Exercise Periods
- Monthly log reports
- Dependability. Gen-Tracker systems have a proven track record.
- Web-based History Log. We can check your generator from anywhere anytime via the internet.
- Low cost installation and low annual generator monitoring fee.
Why it is Important to Exercise Your ValvesComments Off on Why it is Important to Exercise Your Valves
We all like to get our exercise and so do you’re VALVES!
Inevitably we all receive the call, slightly panicky, more than annoyed, it’s from one of your team-members, they needed to isolate the system and that brave valve that has been tucked away in a corner, in a manhole or some other dark, dingy, wet environment suffering silently, will not turn no matter how big a wrench you use or the handle just flat out broke off the valve stem. Now you need to look into valve repair.
When was the last time you exercised those valves? Do you have a valve exercising program? Do you even know where all those valves are?
Some things to consider:
Locate the valves: Physically locate the valves and match them up with the current paper maps. If you have to mark up those maps and get them updated do it. We need to know where those valves are!
Exercise those valves! Nothing is worse than a valve that will not turn. Fully open and close those valves, count how many turns to fully open and close the valve, make sure every part is operable, bonnet nut, discs etc.. And how much torque it requires.
Record keeping: maintain meticulous records of the valves, what model
and size is the valve, when was the last time you replaced the valve etc. ,date you exercised it and most importantly one can never have enough photos of the valve, photos can help you visually the impact over time, familiarize new team member with the location and work conditions
Scheduling repairs and budgeting: A good valve exercise program can help you forecast planned outages where you can repair or replace valves on YOUR SCHEDULE as well as help to reduce those unnecessary and costly premature failures
Most importantly, get started on a valve exercising program right away! If you do not have the manpower or equipment to exercise the valves yourselves, hire a subcontractor to do the work for you. Oftentimes it turns out to be less expensive than doing the work yourselves.
澳洲5历史走势图Comments Off on What is really happening to your pumps because of flushed wipes
Emergency Service to Fix your Clogged Pumps
Municipalities and Wastewater Companies across New Jersey and the Tri-State Region have been warning about flushing so-called “flushable wipes” because of the damage they are causing to our sewer infrastructure. The wipes manufacturers are promoting their wipes as flushable but there is no way to understand what happens to them in our water systems until you see a picture like this.
This problem is only getting worse with the dramatic increased use of cleaning wipes and rags due to COVID-19. We are seeing this across many Water Treatment Plants in New Jersey and New York
Rapid Pump & Meter Service Co., Inc. and Machinery Services Corp. is available 24 hours a day should Emergency situations arise with flushable wipes disabling your pump systems and we can be on site in 4 hours or less from first contact.
Since its inception in 1960, Rapid Pump & Meter Service Co., Inc. has been providing sales, repair, installation and service in the water and wastewater industries.
Diverse experience and technical expertise assures customers of the best service, quality and value in the market today. A comprehensive expertise in electrical, electronic and mechanical services assures accurate response to our customer needs. A fully equipped shop facility and extensive service fleet guarantees Rapid Response and the best service available.
We offer a range of preventative and maintenance services including;
- Pump Station Inspections
- Wet Well Pumping and Cleaning
- Screen Raking and Debris Removal
- Cutter Inspections and Replacements
- Pressure Washing Cleanings
- Reverse Rotations to Release Obstructions
See our full line of Monster Industrial Grinders
See our comprehensive list of Services we provide
Call us today at 973-345-5600 for a consultation or simply send us your name and phone number and we will call back the same day.
澳洲5开奖规律Comments Off on The Importance of Industrial Grinders
Material grinding – also referred to as attrition milling – involves the mechanical breakdown of materials into finer particles. Many industrial processes utilize this as an essential step. Grinding is a sub-category of cutting and is applied in the process of cutting metal. At Rapid Pump & Meter Service Co., Inc. and Machinery Services Corp. in New Jersey, we are your experienced source for industrial grinders. New Jersey customers and beyond can choose among our grinder options that include the SHRED Series Industrial Grinders and HYDRO Series In-Line/Open Channel Grinders.
Industrial grinding is used in the mining industry to extract metals such as gold from surrounding rock. But this process is also used for other purposes mentioned below:
To Change the Reaction of Processes
Various industrial processes make use of material grinding machines. Industrial grinders are used outside of the mining industry for multiple purposes, including to change process reactions. An example includes how smaller particle sizes increase surface area which in turn can reduce the temperature at which a reaction takes place or to improve the speed of the reaction.
Create Nanostructured Materials
Industrial grinders can also produce nanostructured materials simply and cost-effectively. The balance between the dislocation motion and the plastic deformation of the material must be considered regarding the creation of nanostructured materials during mechanical milling. This will help determine if grinding is the proper way to obtain nanoscale materials.
Through a strictly mechanical process, as in the case of the creation of nanomaterials, some materials are challenging to grind down to very fine particulate sizes. Therefore, in certain cases, including when breaking down pigments and other organic substances, wet milling may be used to further reduce particle sizes even more than is possible through dry milling.
Wet milling creates a dry slurry. The process sends the material into a liquid medium as it is mechanically crushed. Depending on the requirements of the material, the liquid may be evaporated after the grinding process is finished.
To learn about the industrial grinders we offer for customers in New Jersey and beyond, give us a call today at 973.345.5600 or send us a message through our contact form.